A Quality Aftermarket Handheld Control made for Meyer and Diamond plows. We also sell the Buyers touchpad and the factory Meyer 22154 control. This is a direct plug-in. It has the 6-pin white plug as you see in the picture.
*NOTE: If you have Slik Stik harness, we now sell an adapter so you do not have to change your harness.
The early touchpads had a black round plug with 6 pins. This was soon replaced with this white plastic plug. If you have the old harness with the round black rubber plug, you can buy this adapter 15766 to mate to the new control. If you do not have the correct harness, you need 15764. If you have toggle switches or a joystick and you want to switch over, you need a new harness. If you want to tackle cutting the harness and adding the touchpad plug, you can cut and wire this adapter in adapter 15766.
Control plugs directly into your existing harness. NO adapter required, just Plug-N-Plow.
Please make sure the connector matches your connector before ordering.
4 way operation.
Automatic Shut-Off when not in use - approximately 22 minutes.
The plow blade will coast to a soft stop (left or right) - results in smoother operation and decreased wear on the plow's hydraulic system.
Express Up/Down Feature.
On/Off switch can be used as an Emergency Stop when required.
Illuminated keypad on control for night time plowing.
All control functions will time out (shut-off) after a period of time. This helps reduce wear on the pump motor and prevent unnecessary battery drain. Up-button times out after 2.6 seconds, while left and right functions time out after 3 seconds.
