Meyer E58H/E61H Mounting Conversion Kit Lift Arm Harness And Couplers Update E47 E57 E60

Meyer lift arm 10514 and kit 08128. Comes with Harness 15912, 2x Adapters 22652 and Couplers 22444 and 22443. These coulers are for the hoses not for the pump. This is for a pump that has the couplers already. 

As you probably already know, Meyer discontinued most of their pumps (E47, E57, E60.) So when you look for a new pump, they push you towards the current E58H (they had a short run of E61H pumps). We also offer a short version of these pumps if you do not want the H. If you have a Classic tube mount or the Conventional mount we recommend sticking with the Non H pumps. We have them available, if you are not finding them anywhere else. We have most pumps in stock rebuilt and new. If your local seller told you this is your only option and they already talked you into buying the E58H or the E61H, this kit is for you so you can hook it up. The newer pumps do have a nicer valve body and valves with weather-proof connectors.

You need the harness kit 15912 included in this kit. It has a wire you need to ground and then the bullet connectors to go to the A, B, C coils red, black and green. The couplers are also different. Not only did they change the hook-up, but they also changed the thread. So you need the adapters 22652 to change from the pipe thread to SAE. The 2 couplers you need are 22444 and 22443. The H pumps are 2" taller than the Standard pump. If you have the MDII or Plus, you do not need this kit with the lift arm.