Rebuilt Meyer/Diamond E-60/E-60H Snow Plow Pump

Here you are buying a professionally rebuilt Meyer or Diamond E-60 Quick lift plow pump. There are several options on the E60 pump, so make sure you know what you need. We have been rebuilding Meyer plow pumps for many years. These are torn down, everything is inspected and we replace any broken or worn parts. They get all new seals Genuine Meyer oil, and after being tested they get painted with Meyer paint and the appropriate decal.

This price is to buy the pump outright. We do trade in cores. If you have a core, we will buy it from you or trade it in.  We will also trade in any other pump you have, but the price will be adjusted. Let us know what you have and we can give you a trade-in quote.

Please notice the different options below:

There are regular or H models. (The H is 2" taller; these are used on MDII/Plus/ and Diamond mounts.)

Next, there are 2 different angling blocks. One has both couplers coming out the top. The other has the male coupler coming out the side of the block.

Last, is the motor. There is a 1 post motor where the power goes to the motor and the ground is to the base. The other is a 2 post; it has power and ground on the motor and a 2nd ground to the base.

We guarantee these pumps for the plow season. But you must properly flush your cylinders and hoses before hooking this pump up and use Genuine Meyer oil. The fluid is filled by removing #14,15 in the picture below. Instructions will come with the pump on how to do this. We will also include a sheet on how to trade in a core if you want a credit returned to you for that. We also do not cover expanded C valve #88 (see below). Every C valve is measured before we send it out, so if it comes back expanded we know someone hit something. This will be replaced at your expense.

Here are some links to the E60 service manual and parts breakdowns:

E-60/E-60H Complete Service/ Shop/ Rebuild Manual

E-60 Pump Parts Breakdown

E-60H Pump Parts Breakdown