Rebuilt Meyer Diamond E-47H Plow Pump

Here is a Rebuilt Meyer E-47H plow pump. The H pump is used on all Diamond Mounts along with the Meyer MDII /Plus and bumper mounts.

Here is a rebuilt 12 volt Meyer E-47H plow pump. The H model pumps are 2" higher. Measure your tank (#4 in the picture below) if you are not sure. The metal tank is 8" verses 6". We are professional rebuilders, rebuilding over 400 pumps per year. Do not settle for a pump off eBay listed as "worked when I took it off" or from other rebuilders that are only doing 1/2 a job to keep the price down. The pump we rebuild is built to last - not to be as cheap as possible. These pumps are torn completely down, cleaned and inspected to the last detail. All worn or broken parts are replaced along will all new seals. After being rebuilt and filled with Genuine Meyer oil the pumps are tested several times, painted with Meyer paint, and then they all get the appropriate decal.

We guarantee these pumps for the plow season. But you must properly flush your cylinders and hoses, before hooking this pump up, and use Genuine Meyer oil. The fluid is filled by removing #12, 13 in the picture below. Instructions will come with the pump on how to do this. We will also include a sheet on how to trade in a core if you want a credit returned to you for that. We also do not cover expanded C valves (#74 below). Every C valve is measured before we send it out so if it comes back expanded we know someone hit something. This will be replaced at your expense.

Here are some link to the E47 parts break down and service manuals:

E-47 Complete Service Rebuild Manual

E-47 Parts Break Down

E-47H Parts Break Down