15088 Meyer V70 12V Pump Kit with Controller

This is a Meyer V70 12V Pump Kit with Controller. Part number 15088.

This is used on the Super V & Super V2/SV2. Not the Super V3.

This also comes in 24 volt as part number 15091 or kit 15093. There is an S.O.S. version of this pump as well it goes by part number 16031.

This also came in the 15192 kit.

Here is a link to the parts list/installation manual. 

Kit includes the following:

• 15088 - 1 - V-70 Lift and P.A. Ass'y. (Complete)
  • 15092 - 1 - V-70 Lift Ass'y. (Unit only)
    • 15633 - 1 - Cover
  • 05815 - 1 - Lift Cylinder 1.75 x 8" SAE-6
  • 22420 - 1 - Hose 1/4 x 33" M-6 x Flat Face Seal / Adapter
• 07628 - 2 - Double Acting Wing Ram with Fittings & Hoses
  • 05755 - 2 - Double Acting Ram 1-1/2" x 12" SAE-6
  • 22420 - 2 - Hose 1/4 x 33" M-6 x Flat Face Seal / Adapter
  • 22418 - 2 - Hose 3/8 x 33" M-6 x Flat Face Seal / Adapter
  • 22460 - 4 - SAE-6 90 Degree Elbow M x F
• 22696 - 1 - Super Vee Plow Side Harness
• 22691 - 1 - Universal Truck Side Harness
• 05024 - 1 - Power Cable
• 22695X - 1 - Super Vee Controller w/ALM & ARM
• 15370 - x1 - Starter Solenoid
• 08792 - x1 - Hardware Bag 15088
  • 15107 - x1 - Reservoir Breather Steel s/n 0030015088 & earlier
  • 15634 - x1 - Cover Strap
    • 20029 - x4 - Bolt H 5/16-18 x 1-1/2" Gr. 2
    • 20050 - x2 - Bolt H 3/8-16 x 1-1/4" Gr. 2
    • 20152 - x2 - Bolt H 5/8-11 x 5" Gr. 5
    • 20153 - x2 - Bolt H 5/8-11 x 5-1/2" Gr. 5
    • 20304 - x4 - Locknut 5/16-18
    • 20309 - x4 - Locknut 5/8-11
    • 20327 - x2 - Lockwasher 3/8"
    • 21398 - x2 - Self Tapping Screw 1/4-14 x 3/4"
    • 22460 - x1 - SAE-6 90 Degree Elbow M x F
• 08202 - x1 - Hardware Bag Plug Bracket
  • 19607 - x1 - Plug Bracket
  • 19609 - x1 - Plate
  • 20027 - x2 - Bolt H 5/16-18 x 1" Gr. 2
  • 22658 - x2 - Bolt H 5/16-18 x 3 Full Thread Gr. 2
  • 20326 -x4 - 5/16 Lockwasher
  • 20525 - x4 - 5/16-18 Finish Nut
• 13333 - 1 - V-70 Mounting Bracket