15694 Meyer Lift Cylinder 6"x1-1/4" E60 E-60 Classic Plow Snow 1-1/8"
This is an aftermarket cylinder, Meyer no longer sells these.
The Meyer E60 had 3 cylinder options, so please make sure this is what you need. This is the original and most common 6" cylinder. it is 7x5/16 part #15694.
Details
This cylinder is discontinued from Meyer, this is a direct replacement for the original Part #15694.
The Meyer E60 had 3 cylinder options, so please make sure this is what you need. This is part #15694 and it is the original and most common 6" cylinder. They now sell an updated one with a larger bore part #15693 for more lifting power, but you will also need the brass followers to go with it (comes in kit 08839 listed in related products.) This is the inner cylinder. These get pitted and rip up the packing cup. If yours is not perfectly smooth inside, replace it. This is for the regular height pumps, not the H. The H pumps are 2" taller than standard, they are used on Diamond plows, Meyer MDII and Plus mounts. If you have the H,you will need part #15205.
The inside diameter is 1-1/4" and the length is 7-5/16"
Make sure you also pick up a basic seal kit, the Genuine Meyer fluid you need and the Meyer yellow paint to do a proper rebuild. If you are doing this yourself, please see links below for service manuals to walk you through the rebuild.