22292 Genuine Meyer Female Hose Coupler Half plow pump

This part number is no longer available from Meyer, get one before the OEM ones are gone. This is a face type coupler, Meyer has replaced it with a Pioneer brand pin type coupler for new style blocks 15821.

This is the new style coupler that threads into the large elbow for the new blocks or uses the provided adapter to hook up to pipe thread.  But note the part # also came in a style with no adapter that goes right to the hose and the part could come either way depending on the stock we have. 

A New Genuine Meyer Female Coupler Half Old Style, part number 22292. This connects to the 1/4" hose (22144) and connects to the block with male coupling 22293. This also came in kit 15846, including the hose male end 22291, (also now discontinued). 

*Couplers must be hooked up in pairs, we never recommend buying one side. You should buy the matching Male Coupler 3/4-16 Valve Block Side to plug into this part, that is part number 22293.

This was used on the old power angling block (15758) versions of the E-47, E-47H, E-57, E-57H, E-60 and E-60H Meyer plow pumps. *Please note that this coupler is not interchangeable with the newer style power angling blocks.*

Make sure you also pick up a basic seal kit, the Genuine Meyer fluid you need, and the Meyer yellow paint to do a proper rebuild. If you are doing this yourself, below we have links to the service manuals to walk you through the rebuild.

E-47, E-47H, E-57, and E-57H - Complete Service Rebuild Manual

E-60 and E-60H - Complete Service Rebuild Manual