36014026 Aftermarket Controller Hiniker V Plow Control Dual Acting Cylinders Handheld
Details
Hiniker had two styles of the V. This is the controller for dual acting cylinders. Has two hoses to each angling cylinder.
This is a new handheld control for the Hiniker V plows.
This is for the v plows with the dual acting cylinders - Models 9850-9960 & 1852-1952. This has the correct plugs on it - no adapters. Plugs right in and replaces the factory 36014026 control. This has 1-button functions, so every function can be done with 1 button, much nicer that the OEM Hiniker control. This has two round plugs. One is 7 pins and one is 3 pins. There is no light switch. It has a looped wire so when the controller is plugged in, the plow lights will be on. You can add a switch to the loop.
V Plow Aftermarket Control Instruction.
Aftermarket Control User Instructions.
- Control plugs directly into your existing harness, NO adapter required, just Plug-N-Plow
- Please make sure the connector matches your connector before ordering
- Automatic Shut-off when not in use, approximately 22 minutes
- The plow blade will coast to a soft stop (left or right), results in smoother operation and decreased wear on the plows hydraulic system
- Express Up/Down Feature
- On/Off switch can be used as an Emergency Stop when required
- Illuminated keypad on control for night time plowing
- All control functions will time out (shut-off) after a period of time. This helps reduce wear on the pump motor and prevent unnecessary battery drain, Up-button, times out after 2.6 seconds, while left and right functions time out after 3 seconds
- Flexible Straight Cord
- Use for both Left or Right Hand
- Dash Mount Control Holder Included
- Instructions come with each control
- Designed and Manufactured in the U.S.A.
More Information
Plow Brand | Hiniker |
---|---|
Truck Manufacturer | Chevy/GMC, Dodge/Plymouth, Ford, International, Jeep, Mazda, Mitsubishi, Nissan, UTV |