New Blizzard Lift Cylinder 2 1/2x4 5/8 B60236 760LT 760SW SA3

Here is a New Aftermarket Blizzard Lift Cylinder (part # B60236 or 60236.) The aftermarket # is 1304643. Blizzard had many different cylinders and we try to keep them all in stock, so make sure this is the one you need. This one is the lift cylinder for 2003-current 760LT, 760LD and 760SW. It is a dual-acting cylinder that mounts and dismounts the plow to the truck mount. This is considered a 2-1/2x4-5/8. If they are pitted they should be replaced since those pits take in water and will cause freeze-up in the pump. Get some Blizzard fluid while you are at it.

If you have a factory B60236 and all you need is the seal kit, that is part # B60368.

If you need the pins, we have them too.

The one for the tank end is #B82061 5/8"x5-3/4" Clevis Pin.

The rod end is #B82033 5/8"x2-3/8".

If you are unsure, here is more information on this cylinder: it is dual acting, has a 5/8" bolt hole in either end, the chrome cylinder is 1-1/4" across and end to end on the black housing is 10 3/4".