Rebuilt Fisher MM SEHP Solenoid Electric Hydraulic Pack Plow Pump Minute Mount 8240 10" Ram HD

A Rebuilt Fisher Solenoid Plow Pump. These came on the later conventional mounts and were used on all early Minute Mount plows. There are two versions: a short and a tall. The short is a 6" and the tall is a 10". This listing is for the tall. This does not require a core. If you have a core, we will take money off the price. We are professional re-builders, rebuilding over 400 pumps per year. Do not settle for a pump off eBay listed as "worked when I took it off," or from other re-builders that are only doing 1/2 a job to keep the price down. The pump we rebuild is built to last - not to be as cheap as possible. These pumps are torn completely down and cleaned and inspected to the last detail. All worn or broken parts are replaced along will all seals. After being rebuilt and filled with Genuine Fisher oil, the pumps are tested several times and painted with Fisher Black paint. We warranty the pumps for the season. Do not be afraid to contact us with problems beyond this period. You must use Genuine Western/Fisher Oil to keep the warranty and the fluid must be properly flushed out of the cylinders and hoses. Instructions will come with the pump on how to do this.

This pump measure 17" center to center on the pin holes when in the down position. This uses 1" pins - top and bottom. The Fisher part # on this pump kit is 8240. The pump alone was 7923. This is also interchangeably with the 2500 PSI 20905.

These make a great conversion if you have the old cable operated pump. You also need harness 7648 and the joystick 7736.

Fisher SEHP pump installation instructions 8240.

Fisher SEHP pump parts list 8240.