We buy pump cores all brands and versions let us know what you have we can take it for a trade.
Here is a Rebuilt Fisher solenoid plow pump. These came on the later conventional mounts and used on all early Minuit mount plows. There are 2 versions a Short and tall. The short is a 6" and the tall is a 10" This listing is for the tall. This does not require a core if you have a core will take money off the price. We are professional re-builders, rebuilding over 400 pumps per year. Do not settle a pump off ebay listed as "worked when I took it off," or from other re-builders that are only doing 1/2 a job to keep the price down. The pump we rebuild is built to last - not to be as cheap as possible. These pumps are torn completely down, cleaned and inspected to the last detail. All worn or broken parts are replaced along will all seals. After being rebuilt and filled with Genuine Fisher oil the pumps are tested several times, and painted with Fisher Black paint. We warranty the pumps for the season. Do not be afraid to contact us with problems beyond this period. You must use Genuine Western/Fisher oil to keep the warranty and the fluid must be properly flushed out of the cylinders and hoses. Instructions will come with the pump on how to do this.
This pump measure 17" Center to center on the pin holes when in the down position. This uses 1" pins top and bottom. The Fisher part # on this pump is 8240.
These make a great conversion if you have the old cable operated pump you also need harness 7648 and the Joystick 7736.
Fisher SEHP pump Installation Instructions 8240
Fisher SEHP pump Parts list 8240