07968 New Meyer 1.5x10 Power Angling Cylinder Cross Drilled O Ring Port

Here is a new 1.5x10" factory cylinder for Meyer plows. The Meyer part # is  07968. This is the newer style with the cross drilled rear tank  so that you can put the hose where you want. This is cylinder # 05877 This has the newer SAE thread, but comes with the 22652 adapter to be used with a pipe hose.  This will replace the 05810, it is also availble with a hose part # 07620.

Meyer has has a few cylinders so make sure this is what you need.

• This is a 1.5x10" angling cylinder, the 1.5" is telling you the size of the rod and the the 10" is giving you the movement.
• It would be the difference between full open 27.5" and full closed 117.5" = 10".
• These have a 5/8" hole in either end and the tank end is cross drilled.
• The port is an SAE oring style fitting.
• The yellow tank alone measured 15" or 10" from weld to weld.

The aftermarket part number is SA11