15207 Meyer Lift Cylinder 6"x1-3/4" E47 E57 Classic Plow Snow Plow

This is the inner cylinder for many of the Meyer pumps. These get pitted and rip up the packing cup. If yours is not perfectly smooth inside, replace it.  The Meyer part # is 15207. This is for the regular height pumps, not the H. The H pumps are 2" taller than standard, they are used on Diamond plows, Meyer MDII and Plus mounts. If you have this, you will need 15205. 

The inside diameter is 1-3/4" and the length is 7-3/8"

This ram was used in these pumps: E-47, E-46, E-45, U13 and E-57.

Make sure you also pick up a basic seal kit the Genuine Meyer fluid you need and the Meyer yellow paint to do a proper rebuild. If you are doing this yourself below we have link to the service manuals to walk you through the Rebuild.

E-47, E-46 complete Service Rebuild Manual

E-47, E-46 Parts Break Down

E-47H, E-46H Parts Break Down

E-58, E68, E-78, E88 Shop/ Repair Manual

E-58, E-68, E-78, E-88 Parts Breakdown