This is Meyer Part #15953. The Meyer E60 had 3 cylinder options so please make sure this is what you need. This is the 6" HD cylinder, it is 6x1-3/4 and part #15953. The original one was 1-1/8" and part #15694.Â
The Meyer E60 had 3 cylinder options, so please make sure this is what you need. This is the 6" HD cylinder, it is 6 x 1-3/4 and part #15953.
The original one was 1-1/8", that is part #15694. This is the inner cylinder. These get pitted and rip up the packing cup. If yours is not perfectly smooth inside, replace it. This is for the regular height pumps, not the H. T
he H pumps are 2" taller than standard, they are used on Diamond plows, Meyer MDII and Plus mounts. If you have one of those you will need part #15205.Â
They also offer this in an upgrade kit part #08839, which provides you with the rest of the pieces to do the update.
The inside diameter is 1-3/4" and the length is 7-1/16"
Make sure you also pick up a basic seal kit, the Genuine Meyer fluid you need and the Meyer yellow paint to do a proper rebuild. If you are doing this yourself, please see below links to the service manuals to walk you through the rebuild.
