22610 Meyer Diamond One Piece Plug Truck Side MDII/ Plus Mount Plow With Touchpad Harness

This is the Meyer Harness 22610. It is the truck side harness. This is the best way to buy it because it has the touchpad harness and power cables built right into it. If you need the complete truck side, you will need a solenoid, battery wire, module kit and the headlight adapters for your vehicle. This is the plug that was used on the MDII and Plus mount plows. It is the rectangle version. The later ones are round.  This plugs into 22604 plow side or the 22262 plow side plug . It is a 17-pin harness, has the power and ground, but you also need the truck side cables for it to plug into. It has the Night Saber plugs and the three pump solenoid wires.

If you have a connection problem, you should buy both sides. The kit part # is 07240. 

Make sure you get a tube of dielectric grease to protect these plugs.

This is available in a kit with 22604 as part # 07290.

Here is a link to the instructions for these plugs.

Here is a link to the pin configuration on this plug.