3007527 Buyers Extended Poly Chute SHPE SaltDogg Spreader

This is a Buyers Extended Poly Chute for SHPE SaltDogg Spreaders. Part number 3007527.

Fits the following spreaders:

• SHPE0750
• SHPE1000
• SHPE2000

If you need the standard size chute, that's part number 3025070.

Includes the following (see diagram in photos):

• 3007527 - x1 - Extended Length Poly Chute Assembly
  • 1 - 3007526 - x1 - Extended Chute Housing
  • 2 - 3012431 - x1 - Motor Only
  • 2 - 3006753 - x1 - Replacement Wire Harness for Saltdogg® SHPE1500 and TG Spreaders
  • 2 - 3006833 - x1 - Spinner Gearmotor
  • 2 - 3054941 - x1 - Repair Pigtail, SHPE Spinner Motor
  • 3 - 3007824 - x1 - Motor Retainer
  • 4 - FWL031058008SS - x1 - WASHER, SPLIT LOCK, 5/16in, SST
  • 5 - FCS031018063SS - x1 - SCREW, CAP-5/16in-18 X 5/8in
  • 6 - 3012393 - x1 - Replacement 14 Inch CW Poly Spinner for SaltDogg® Spreader
  • 8 - 3007564 - x1 - BRACKET, SHIELD, SST, SALT DOGG
  • 9 - 3007004 - x1 - SHIELD, SPINNER, SST, SHPE1500
  • 10 - 3007413 - x1 - Replacement Gear Motor Cover for Saltdogg® Spreader Chutes
  • 11 - FWF038100007SS - x1 - WASHER-FLAT USS, 3/8in, SST
  • 12 - FCS038016100SS - x1 - SCREW CAP-3/8in-16 X 1in, HEX HEAD, SST
  • 13 - FNE038016044SS - x1 - NUT-NYLOCK, 3/8-16 X 7/16 THK, SST
  • 14 - 3007522 - x1 - SCREW, SHEET METAL #12 X 1.0in HEX WASHER
  • 15 - 3007113 - x1 - Clevis Pin with 5/16 Inch Diameter and 2-1/2 Inch Length
  • 16 - FPC013000100 - x1 - COTTER PIN 1/8in x 1in ZN
  • 17 - 3002631 - x1 - LABEL, NO STEP
  • 18 - 3007844 - x1 - DECAL, DANGER STAY CLEAR FOR POLY CHUTES
  • 19 - 3025065 - x1 - BUSHING CABLE STRAIN RELIVER

And here is a direct link to the parts list/diagram. 

SHPE750, SHPE 750, SHPE 1000, SHPE 2000