31699 Mount 2019-2026 Chevy "All New" 1500 GMC Sierra Silverado Western Ultramount SnowEx Blizzard

Mount # 31699 to fit many of the Western Ultramount plows, the SnowEx RD and the Blizzard Power Hitch 2 plows. This comes with the mount and hardware.

There is now an updated 31699-1 Available that is 2" longer this is required for the 2025 + Elevation and Denali Packages. 

If you have a Trial Boss or AT4 model use mount 33217 instead.

This one bolts to "All New" 2019+ Chevy GMC Silverados and Sierras with the 1500 frame. Also Fits Suburban and Tahoe. 

*** NOTE FOR 2019 - They came both old and new. This mount only fits the NEW body, it will not fit old body.  If you have the old body use 31599-1.

You can determine new versus old style by looking at the truck’s model number.  This is a K or C followed by 5 digits.  K=4x4 and C=4x2 so we only are interested in K models.  Example K15753 is an old style Extended Cab - Short Box truck while K10753 is a new style Extended Cab – Short Box truck.  Note the underlined numbers: 10 = new style, 15= old style.  The model number can be found on the vehicle build sticker usually on the glove box door, or on one of the door frames or door pillars. It is not part of the VIN and might not appear on the dealer’s window sticker 

With this kit you get the 83875 DS mount, two 83876 PS mounts, three Handle Bolts 22314, and the 83874 Bolt Bag.

If you'd like the Installation Instructions, you can find them here.

The Parts List can be found at this link.

When installing this snow plow, there is a minmum clearance needed between a point on your vehicle and the ground. Must be measured on a smooth, hard, level surface. If your vehicle does not meet the minimum requirement, you will need to also purchase a leveling kit.

Refer to the image below to find the point to measure from: