40514 Blizzard SINGLE Drop Height Adjustment Plate PH2 Mount Adapter 40540 Kit 72129

This is a SINGLE Blizzard tall height adjuster plate for the Power Hitch 2 plows. These bolt to the side of the adapter to lower it down.

These also go by part #'s #40514 and #40540 (or buy 2 to make a kit Part #72129).

There is also a short option one that goes by #40539 & #40781 They also came in kit #72128.

To decide which mount adapter kit you need, park your vehicle on level ground and measure from the ground to the center of the hole on the U bracket side plate. If the height is 14 1/2" or less, you do not need to adjust the height of your mount. However, if the height is 16" to 17 1/4", then you should install the tall height adjustment adapter #72129.

If the measurement is 14 1/4" to 16", you will need the alternative short height adapter kit, which is #72128.

You can find the parts list and installation instructions at this link.