40515 Blizzard SINGLE Drop Power Hitch 2 Height Adjustment Plate Mount Adapter 40539

One single side of the Blizzard #40515. This is the short height adjuster plate for the Power Hitch 2 plows. These bolt to the side of the adapter to lower it down. Each plow needs 2, so you will have to buy 2 if you need them.

These also go by #40539 & #40781. They also had a kit part #72128.

There is also a tall one that goes by #40514 and #40540 or kit #72129.

To decide which mount adapter kit you need, park your vehicle on level ground and measure from the ground to the center of the hole on the U bracket side plate. If the height is 14 1/2" or less you do not need to adjust the height of your mount. If the height is 14 1/4" to 16" you should install the short height adjustment adapter #72128.

If the measurement is 16" to 17 1/4" you will need the alternative tall height adapter kit #72129.

You can find the parts list and installation instructions at this link.

This can be used to pin into the Western Ultramounts, Blizzard and SnowEx and welded to accessories.