83718 SnowEx VX-1500 Spreader Chute Assembly

SnowEx Chute Assembly # 83718
This is the fully assembled chute assembly for the SnowEx VX-1500 spreader. If you need additional parts for your SnowEx spreader, we also carry all individual components.

Parts List:

1. D4135 - .093 x 2-3/8 Hairpin Cotter

2. D6524 - 5/16-18 x 1-1/2 Hex Cap Screw

3. T15016 - 1/4-20 Waxed Locknut

4. D6553 - #10 x 3/4 Slotted Hex Washer-Head

5. D5502 - Spinner Drive Cover Screw

6. D5518 - Spinner Drive Enclosure

7. D6563 - 1/2 x 20 Bent Pin

8. D5536 - 3/8 x 5/16 Socket Shoulder Hex Cap Screw

9. 21651 - Rubber Grommet

10. D6819 - Spinner Drive Enclosure Cover

11. D6107 - 8:1 Worm Gear Transmission

12. D6820 - Spinner Guard Tube

13. D6131 - 1/4-20 x 1/2 Serrated Flange Hex Cap Screw SS

14. D6823 - 12 x 5/8 Spinner

15. D6824 - 5/8 x 1 x 7-5/8 Spinner Hub

16. D6132 - 1/4-20 x 3/4 Serrated Flange Hex Cap Screw SS

17. D6827 - Spinner Motor

18. D6832 - Material Chute

19. T15049 - 5/16-18 x 1/2 Hex Cap Screw SS

20. D6833 - Spinner Deflector

21. D6138 - 5/16-18 Locknut

22. D6854 - 1/4-20 x 1 Serrated Flange Hex Cap

23. 78413 - Spinner Harness Screw SS

24. D6172 - #10-32 x 5/8 Serrated Flange Hex Cap Screw w/Patch

25. F50438 - 1" Round Tube Plug

26. 99797 - Spinner Hub Kit

27. D6198 - Latch Keeper

28. 83722 - Spinner Transmission Kit

29. D6232 - Motor Drive Coupler

30. D6165 - 5/16 Flat Washer

31. D6467 - 1/4 x 3/4 x 1/2 Retainer

This chute assembly provides a complete setup for the SnowEx VX-1500, and you can get any additional individual components you might need from us as well.

For related parts and diagrams, check this document.