89361 10'6" MVP3 V Plow New Western 2 x 11 Dual Acting Angling Cylinder 1" Hole

A new Genuine Western Dual Acting Angling Cylinder. This is only for the 10'6" MVP3 V plows. This is considered a 2"x11" cylinder. This uses the O ring style fittings. There is a port on the left and right of the pin hole on the back. One side is plugged and on the top in the front of the cylinder.  This is also used by Fisher on the 10.5' XV2, but they use part # 89362.

If you have a 8.5 or 9.5' V plow they use # 44341 and has a 1-3/4 inside cylinder displacement. 

This is a low friction cylinder. They do not use a compression packing, but an O ring sealed nut.

This has 1" holes for the pins. Center to center on the pin holes when closed is 18 1/4",

The tank is 17 from end to end including the nut.

The chrome rod is 1.75" across.

There are ports in the back on both sides that are flush and one towards the front that is raised both O-ring style.

If you need parts to repair your cylinder, piston assembly is 81877, Gland Nut 81871 and Decal 68675.