96106076 New Snoway Gravity Lift Cylinder Single Acting SA21

Here is a new Aftermarket Sno-Way Single-Acting Lift Cylinder. This is for Sno-Way plows with gravity down. You will not find a better deal on this cylinder. The Sno-Way part # is 96106076 and the aftermarket # is 1303555. They had many different cylinders. We try to keep them all, so make sure this is the one you need. This one was used on the 26 series, 29 series, 29T series and 32 series plows. If they are pitted, they should be replaced as those pits take in water and will cause freeze-up in the pump.

Below is more information on this cylinder:

The port is an SAE thread with an o ring - not a pipe thread.

Single-acting.

It has a 9/16" bolt hole on the back end through the 4" long tube.

The outside diameter of the tube is 1".

The chrome rod end has a 3/4" hole.

The chrome cylinder is 2" across.

End to end on the black housing is 7.75".

Center of pin to center of pin is 10 1/2".