36014026 Aftermarket Controller Hiniker V Plow Control Dual Acting Cylinders Handheld
Hiniker had two styles of the V. This is the controller for dual acting cylinders. Has two hoses to each angling cylinder.
This is a new handheld control for the Hiniker V plows.
This is for the v plows with the dual acting cylinders - Models 9850-9960 & 1852-1952. This has the correct plugs on it - no adapters. Plugs right in and replaces the factory 36014026 control. This has 1-button functions, so every function can be done with 1 button, much nicer that the OEM Hiniker control. This has two round plugs. One is 7 pins and one is 3 pins. There is no light switch. It has a looped wire so when the controller is plugged in, the plow lights will be on. You can add a switch to the loop.
V Plow Aftermarket Control Instruction.
Aftermarket Control User Instructions.
- Control plugs directly into your existing harness, NO adapter required, just Plug-N-Plow
- Please make sure the connector matches your connector before ordering
- Automatic Shut-off when not in use, approximately 22 minutes
- The plow blade will coast to a soft stop (left or right), results in smoother operation and decreased wear on the plows hydraulic system
- Express Up/Down Feature
- On/Off switch can be used as an Emergency Stop when required
- Illuminated keypad on control for night time plowing
- All control functions will time out (shut-off) after a period of time. This helps reduce wear on the pump motor and prevent unnecessary battery drain, Up-button, times out after 2.6 seconds, while left and right functions time out after 3 seconds
- Flexible Straight Cord
- Use for both Left or Right Hand
- Dash Mount Control Holder Included
- Instructions come with each control
- Designed and Manufactured in the U.S.A.
Plow Brand | Hiniker |
---|---|
Truck Manufacturer | Chevy/GMC, Dodge/Plymouth, Ford, International, Jeep, Mazda, Mitsubishi, Nissan, UTV |