Aftermarket Meyer 22693 Xpress Control New Diamond Touch Pistol Grip E68 E88

A Replacement Aftermarket Controller for the Meyer Xpress plow.

This controller was made to replace the problematic factory 22693. The O.E.M. control is known for burning out and having the buttons pop off. It does not have the shake mode or the automatic raise and lower mode, but has the mount and dismount function.

We have had great luck with these aftermarket controls. The buttons are much larger than the OEM. Many people love that, though some think they are too big. We give a 2 year warranty with this control from the day you buy it.

To Enable Mount and Dismount: To enter this mode, you have to double-tap the left button within 60 seconds of turning the control on. The center light on the control will turn blue, letting you know you are in mount and dismount mode and the switch on the front will now work. To exit this mode, you just tap any button and the blue light will go out.

This is for Xpress plows only. The early Xpress plows used a wireless control, but because of some issues it was rewired and replaced with this 22693 pistol grip control. This has a 12-pin rectangle plug on the end of the harness with a relay adapter built into it.

This will only plug into the Xpress harness 22691.

• This control is backlit Green when on. 
• This has Float if you hold down for 1.3 seconds and the center light will turn Red telling you it's in float. Hitting up will disable the Float.
• To protect your pump, all functions on this control have built in time-outs. 2.6 seconds on Raise and 3 seconds on Angle.
• This has automatic shut down after 22 Minutes of being idle. To restart you have to turn off and back on.
• When angling, the Soft Start Feature this lets the blade coast to a stop rather than slamming.
• Double tap Up & Float - if you do a quick double tap on up it will raise the plow for 2.6 seconds. Double tap down will automatically enable float.