Aftermarket Blizzard Lift Cylinder 41095 7600HD 8000HD 8600HD 8600SW 8100 86110LP

* This cylinder requires an elbow for the back hose it does not have a 90 on the cylinder like the original cylinder. 

Here is a New Aftermarket replacement Blizzard Lift Cylinder 41095. They had many different cylinders and we try to keep them all in stock, so make sure this is the one you need. This one is for the Power Hitch 2 plows only. This fits the 7600HD, 8000HD, 8600HD, 9000HD, 8600SW, 8100PP and 86110LP power plows. It is a dual-acting cylinder that mounts and dismounts the plow to the truck mount.

If you need parts for your factory cylinder the seal kit is 41098, the gland nut with seals is 48358.

If they are pitted, they should be replaced since those pits take in water and will cause freeze-up in the pump. Get some Blizzard fluid while you are at it.

If you are still unsure, here is some more information on this cylinder: it is dual-acting, it has a 1" bolt hole in both ends, the chrome cylinder is 1.5" across, end to end on the black housing is 11-5/8" total end to end closed is 13.5", and  it measures 3-1/2" across the bottom of the black housing.