Stork's Plows is not a dealer of or an experienced installer of Smith Spreaders. This information is for your reference only. There is some overlap with other spreaders, but our technical assistance will be limited.

Standard SSV spreaders are 83" wide and 53" tall while the High Capacity (HC) spreaders are 83" wide by 53" tall. All SSV spreaders have the option of an auger drive up to 16 feet and an auger drive option with a sensor motor.

SSV Spreaders come in the following models:
SSV-8 (5.2 cubic yards)
SSV-8HC (7.2 cubic yards)
SSV-9 (5.8 cubic yards)
SSV-9HC (8.1 cubic yards)
SSV-10 (6.4 cubic yards)
SSV-10HC (9 cubic yards)
SSV-11 (7 cubic yards)
SSV-11HC (9.6 cubic yards)
SSV-12 (7.6 cubic yards)
SSV-12HC (10.7 cubic yards)
SSV-13 (8.3 cubic yards)
SSV-13HC (11.7 cubic yards)
SSV-14 (9 cubic yards)
SSV-14HC (12.6 cubic yards)
SSV-15 (9.7 cubic yards)
SSV-15HC (13.5 cubic yards)
SSV-16 (10.4 cubic yards)
SSV-16HC (14.4 cubic yards)

Accessories and Options:
S/S Cabshield
S/S Access Ladder (side or rear access)
S/S Tie Down Bracket Kit (4), standard or high capacity
Mild steel tailgate latch bar, 1" or 1.75" round ends
Lever operated door instead of screw jack
170 degree swing-up chute
Galvanized hydraulic pipes (passenger side is standard)
S/S hydraulic pipes (passenger side is standard)

Frame Mount Kits (SSV-8 to SSV-14):
S/S light boxes (6 x 6 x 3) 4.5" hole
Bar on every chain link
3/8" rubber belt over conveyor chain

For more information including weights and other options, check this document.