FF350SD4B 1994-2004 Ford F-250 F-350 Super Duty Timbrens Front Axle SES Suspension Upgrade

Here is a new set of Timbrens FF350SD4B for the front of a 1994-2004 Ford F-250 or F-350 4WD truck equipped with a snowplow prep package. Can only be used with trucks that have 4WD.

If your truck does not have the Snow plow Prep package you need kit FF350SD4.

These will keep your front from dropping when you have a plow installed. They make a huge difference. The Timbrens bolt in place of the factory bump stops so they are easy to change.

Timbren Suspension Kits (SES Kits) are designed to enhance the suspension of your vehicle. Each laser cut piece of steel is precision bent and powder-coated to ensure a quality fit. They've engineered their hollow rubber springs to deliver a progressive spring rate. The more weight that pushes down on the rubber springs (weight from a snowplow or heavy aftermarket accessories) the harder they work to prevent front-end sag.

Easiest to Use: Rubber cushions absorb road shocks and automatically adjust to uneven loads or road conditions.

Easiest to Maintain: There are no airlines or fittings to allow leaks. Simply bolt the kit on and you are set for a lifetime of trouble-free suspension.

Easiest to Install: There are no holes to drill, no airlines to route and SES Kits can be installed in a matter of minutes using basic hand tools.

The softer ride quality of today's trucks and the mediocre suspensions found on most trailers can cause excessive trailer sway, instability and suspension settling. Timbren's high performance suspension packages will ensure added safety and peace of mind.

The installation instructions can be found at this link.