15758 New Meyer Empty Valve Body E-46 E-47 E-57 E-60 Power Angling block Plow Pump Diamond

Here is a new old stock Empty 15758 Meyer angling block. There has been more than one style so make sure this is the one you need. This can be used to make a Meyer E46 into an E47. Or can be used to replace the block on an E47, E57, E60. Some of the newer pumps have the coupler coming out of the side of the block this one has both of them coming out of the top. This is also the style with the acorn nut on the side for the crossover valve.

We have many and they all look similar but you will not get the one in the picture. It will be a good used comparable block.

You will need to add the valves, they are not included. We also sell a rebuilt block that has the valves.  

We also have new blocks available full and empty.  Make sure you also pick up a basic seal kit, the Genuine Meyer fluid you need, and the Meyer yellow paint to do a proper rebuild. If you are doing this yourself, below we have links to the service manuals to walk you through the rebuild:

E-47, E-46 Complete Service Rebuild Manual

E-47, E-46 Parts Break Down

E-47H, E-46H Parts Break Down