New Blizzard Lift Cylinder 3x4 5/8 B60255 760HD 800HD 860HD 860SW 810 SA5

Here is a new Aftermarket Blizzard Lift Cylinder (#B60255 or 60255.) Another aftermarket # is 1304645. They had many different cylinders and we try to keep them all in stock, so make sure this is the one you need.

This one is the lift cylinder for 2003 and later 760HD, 800HD, 860HD, 860SW and 810 Power Plow. It is a dual-acting cylinder that mounts and dismounts the plow to the truck mount. This is considered a 3x4-5/8. If they are pitted, they should be replaced since those pits take in water and will cause freeze-up in the pump. Get some Blizzard fluid while you are at it.

This can be used in place of the 99-02 cylinder B60027 but you will have to change the fittings cause the ports are different but it can be used since the original is hard to find. 

If you have a factory B60255 and just need the seal kit, that part # is B60371.

If you are still unsure, here is some more information on this cylinder: it is dual-acting, it has a 3/4" bolt hole in either end, the chrome cylinder is 1-1/4" across, end to end on the black housing is 10 3/4" and it measures 3-3/8" across the bottom of the black housing.