Plow Side Light Harness Meyer Diamond Truck Lite 6 Prong 07061 / 07062

A New Harness for the Plow Light Side of the 6 Wire Lights. This goes from the plug up into the light. They are different from left and right, but the only difference is 1 wire color. The part # is 07061 or 07062. These lights were made by Truck Lite. This harness is for the special DRL lights. To tell if you have these lights, look at the plug. There are 6 pins. It has 6 actual wires coming from the light. These will work on most of the newer trucks and use the headlight adapters to plug into the truck lights. No splicing except the turn and park lights. The Meyer kit was part # 07033.

Truck Lite uses a similar kit (# 80900), but they do not use the same plugs. If you have the Truck Lite kit with hard plastic plugs, you need the 80930 at this link. You cannot interchange them. On the top of your light, they will say "Meyer by Truck Lite". All you are getting in this listing is the harness Original Meyer made by Truck Lite. These plug into harness  # 07036. This style has 6 pins and a 12-tab switch. Do not confuse these with the non DRL lights that use a 5-pin plug and 6-tab switch. These can be used on any brand plow. They do fit many of the newer trucks.

Here is the link to the Truck Lite installation instructions 80900.

The original Meyer instructions for light kit 07033.

Truck Lite's original build sheet for Meyer with color codes and all schematics.