Rebuilt Heavy Duty 2 in. Western Cable Operated Plow Pump Conventional Mount Mark III HM 56097

Price requires a matching core. Different core will adjust price

You are looking at the rare Heavy Duty Western Cable Pump Part # 56097. This has the 2" lift ram instead of the 1.5". This was used on the larger plows - 9' and 10' Heavy Weight blades. This is a freshly rebuilt Western Mark III cable operated electric plow pump. These were used on the Western Conventional mount snow plows. We tear these down, clean them up, inspect all parts, and they are put back together with all new seals and fluid. The pumps are tested on our test stand, then painted with Western paint. We only use Western oil and paint.

To properly install this and to get any form of warranty from us, you are required to change the fluid with Genuine Western, only, in the hoses and cylinders before you hook this up. A common angling problem is bad couplers, so we recommend that you get a new set of couplers from us to match the pump you send us. 

The cable adjustment can be touchy. We have instructions here to properly adjust. 

If you want to get away from the cable pump, you can convert to electric. but they only come in 1.5" (and with a bigger plow it may not have the lifting power) .  It is not a cheap conversion, but it makes a nice setup. You need the solenoid pump, harness 56307, and the control. If you have further problems, feel free to call us.