A Rebuilt 12 Volt Meyer E-47 Plow Pump.
A Rebuilt 12 Volt Meyer E-47 Plow Pump. If you need an H model, they are 2" higher and listed in a separate listing. Measure your tank (#4 in the picture below) if you are not sure. The metal tank is 6" versus 8". We are professional re-builders, rebuilding over 400 pumps per year. Do not settle for a pump off eBay listed as "worked when I took it off," or from other re-builders that are only doing 1/2 a job to keep the price down. The pump we rebuild is built to last - not to be as cheap as possible. These pumps are torn completely down, cleaned and inspected to the last detail. All worn or broken parts are replaced along will all new seals. After being rebuilt and filled with Genuine Meyer oil the pumps are tested several times, painted with Meyer paint, and then they all get the appropriate decal.
We guarantee these pumps for the plow season. But you must properly flush your cylinders and hoses before hooking this pump up and use Genuine Meyer oil. The fluid is filled by removing #12,13 in the picture below. Instructions will come with the pump on how to do this. We will also include a sheet on how to trade in a core if you want a credit returned to you. We do not cover expanded C valves #74 (see below). Every C valve is measured before we send it out, so if it comes back expanded we know someone hit something and this will be replaced at your own expense.
Here are some links to the E47 parts breakdown and Service Manuals:
E-47 complete Service Rebuild Manual
Posted on
Posted on
Posted on
