Rebuilt Western Cable Operated Plow Pump Conventional Mount Mark III 56139

You are looking at a Freshly Rebuilt Western Mark III Cable-Operated Electric Plow Pump. Pump # 56139 came in box 53135.

These were used on the Western Conventional mount snowplows. We tear these down, clean them up, inspect all parts, and they are put back together with all new seals and fluid. The pumps are tested in our test stand, then painted with Western paint. We only use Western oil and paint.

To properly install this and to get a warranty from us, you are required to change the fluid with Genuine Western fluid only in the hoses and cylinders before you hook this up.

A common angling problem is bad couplers, so we recommend that you get a new set of couplers from us to match the pump you send us. The cable adjustment can be touchy. We have instructions here to properly adjust. 

The price requires a complete rebuildable core. If you do not have a core, you need to pay the Core Charge. 

If you want to get away from the cable pump, you can convert to electric. It is not a cheap conversion, but it makes a nice set up. You need the solenoid pump and harness 56307 along with Western joystick controller # 56369 and adapter # 62392.

If you have further questions, feel free to call us.

* A core must be complete. We do not care how it operates, but if the main housing is not usable it will not be a full core. If it is less than this, you will not get the full core price back.