*Special ( Light Delete ) Fleet Flex Truck Side Light Wiring Kit 4 Pin Fisher, Western, Blizzard, Snowex

Every year we get a few calls on hooking up a Fleet flex plow with no lights. Well now we have an option for you. As you may know these plows have the lighting system tied into the plow wiring so you can not run a plow with out the lights being plugged in. So in the event you put a V plow on your Skid loader we have to work around the light problem. 

* Note * The control harness is for an ATV so it is short and it works fine if you are able to put the power on the driver side. If you battery is on the passengers side it may be too short, but we have created another solution for that.

Here is your solution - this is a complete wiring kit with (plow light delete), all you need is the plow and the controller. It will not have a module or any light wiring, you just need to run the 72527 power cable to the battery and the keyed ignition wire to a fuse from the 52596 control harness.

This only works on Fleet Flex plows. They have a 4 pin controller and a 4 pin power cable (2 big and 2 small.) Works on Fisher, Western, Snowex, and Blizzard Power Hitch 2.