Western 61185 Fisher 8035 Park Or Turn Lamp Harness Kit

This is Western's # 61185 (or Fisher's # 8035) Park or Turn Harness kit, also known as 63419. This is used on many different trucks to prevent overload on the system. This comes in some kits and is needed to be purchased separately for other kits. These are used on Conventional mounts, Unimounts, MM and Ultramounts. The module usually has part # 61184 on it.

Here is a link to the install instructions for the 61185 park turn kit.

Chevy GMC: Snowplow park/turn and headlights can overload the vehicle electrical circuit when hazard lights flash for extended periods of time or when the foot brake is activated with hazard lights flashing. GM recommends that a light harness and relays be installed for snow plow lighting. See your GM dealer for service bulletin #90-8A-20. Western also offers a Directional Harness Kit, # 61185.

Dodge: 1994 and later vehicles with cab marker lights and/or dual rear wheels require the installation of 61185 Park or Turn Lamp Harness Kit in the park light circuit. This will prevent electrical overloading of the vehicle headlamp switch or wiring harness.

Ford: Cab marker lights require the use of a second 61185 Park or Turn Harness Kit installed in the cab marker/park light circuit. (Second 61185 sold separately.) NOTE: All 1997 and later Ford trucks require Kit #61185 for turn signals and cab marker lights if equipped.