11766 Fleet Flex Truck Side wiring kit 2 Wire harness Western Fisher Blizzard SnowEx Isolation Multiplex V

This works with both 3 port isolation modules. If you have a 4 port you will need kit 44486.

Here is a New Conversion Kit. If you have a 3-plug vehicle with a 3 port isolation module wiring and you want to plug into the new Fleet Flex 2-wire snow plows, this is what you need. You will also need the 4-pin controller to plug into this, if you don't have it. This plugs into the plow side power cable 42015. It is used on some of the Fisher, Western, SnowEx, and Blizzard plows that use the 4-pin controller.

You are getting vehicle power cable 72527, vehicle control harness 28587, and 61548 plug covers. 

(72527 is the newest version of the 42014 coming as 72168 and 90730.)

Here is a link to the Western Parts list for this kit.

The 2-wire Fleet Flex was used on the plows below:

MVP Plus Western V-plow

Western Wide Out

Western HTS

All Series 2 Western straight blades

Fisher XLS

Fisher Xtreme V

Fisher HT

Fisher Series 2 straight blades

All Blizzard Power Hitch 2 plows

Make sure you add a tube of dielectric Grease to the cart to prevent these plugs from corrosion.