15381 New Aftermarket Meyer C Valve Plow Pump E47 E57 E60 Diamond

A New Aftermarket Meyer C Valve (part #15381). This is the valve that angles the plow to the right. When you run the pump motor and put 12 volts to this small green wire it will magnetize the coil, opening the valve, and causing the plow to angle right.

There is no valve to angle a Meyer plow to the left, which is the default of the pump. There is a common misunderstanding If your plow sticks to the left that there are a number of things that can be causing it, but the most common issue is the C valve. To test the coil you can touch the coil with something metal and if it has 12 volts and ground it should be magnetized. If the wires are brittle, replace them because you do not want them breaking off in a snowstorm. All you need is a 7/16" wrench to remove the nut. If it does not turn, heat it up or you will need a valve too. The coil for this valve is #15430 or you can buy them in an assembly (part #15358).  This coil is found on these pumps: E45, E47, E47H, E57, E57H, E60, E60H and E48. 

Below we have links to the service manuals to walk you through the rebuild:

E-47, E-46 Complete Service Rebuild Manual.

E-47, E-46 Parts Break Down.

E-47H, E-46H Parts Break Down.

E-58, E68, E-78, E88 Shop/Repair Manual.

E-58, E-68, E-78, E-88 Parts Break Down.