16027 E73 Horizontal Electro-Lift 12V Meyer Plow Pump Unit 16 pin harness

A New Meyer E73 Plow Pump Unit. This is made to be mounted Horizontal. This has the 16 pin harness 23039.   

This is part #16027. This pump is used on the newer SOS plows. It comes with the solenoid, harnesses and mounting bracket already attached. We also sell these pieces individually.

This is the same as pump 16024 that would have the 12 pin harrness instead. 

Kit includes:
Motor Terminal 15212
Pump Assembly 15211
1/4" x 3" Allen Head Screw 15083
Pump Filter Assembly 15101
Reservoir w/Drain Plug 15223
Reservoir Clamp 15066
Reservoir Breather 15187
5-3/4" Oil Pick Up Tube
8" Oil Return Tubes
Base Assembly
Adjustable Relief Valve 15213
Seal Kit 15214
12V Coil 15215
"A" Cartridge Valve 15146
"B" Cartridge Valve 15117
"C" Cartridge Valve 15111
Needle Valve Kit 15217
Dual PO Check Valve Kit 15216
Check Valve Assembly Kit 15152
Adjustable Relief Valve 15218
90-Degree Elbow 22866
Mounting Bracket 14185
3/8" x 1" Bolt 20049
5/16" x 3/4" Bolt 20025
Lockwasher 20326
Motor Solenoid 15220

You can find the parts list and installation instructions at this link.

Info on other E73 plow pump units 
16021 Horizontaly mounted unit Non adjustable drop speed w/ harness (Now part # 16028)
16024 Horizontaly mounted unit With adjustable drop speed w/ 12 pin harness (Now part # 16028)
16026 Bare unit only Drop speed adjustable 
16027 Horizontaly mounted DLX w / 16 pin harness 
16028 Unit only Drop speed adjustable  DLX