17090 Meyer EZ Classic Plow Mount 1973-1992 Dodge Ram W150

These are no longer available from Meyer. 

Here is a new mount (part # 17090.) This is just the mount, no bolt bag. Fits the Meyer EZ Classic mount to a 1973-1993 Dodge W150 or Ram Charger with the 4000 LB front axle. If you have the heavier front axle or your vehicle is lifted, you should use the 17099. If you cannot get the 17099, you have to make this mount work. The difference is the height -  it sits lower. This is the complete undercarriage. You get the clevis # 11270, the two rear arms 10426 and 11185, two side plates 11266.

If you want the hardware you may have to source the bolts, the bag is no longer available, but the part # was 08598. This does not come with the tubular lift frame either. You will need to get that if you don't have it. The lift frame only fits the full size trucks. Lift frame part # is 11255.

If you measure from the ground to the upper bumper bolt where this mount bolts up and it is more than 24.5", you need the 17099. They want the plow pins 10.5" off the ground for the A-frame.

From center to center of the tube it is 23.5".

Center to center on the A-frame tabs is 23.5".

Here is the parts list and installation instructions for 17090.