36014022 C-Plow Cab Control Aftermarket Controller Hiniker

A New Handheld Control for the Hiniker C Plows (part # 36014022). 

This is a direct replacement. It has the correct plugs on it - no adapters. Plugs right in and replaces the factory control. This has 1-button functions so every function can be done with one button. This has two round plugs; one is 7 pins and one is 3 pins. There is no light switch. It has a looped wire so when the controller is plugged in, the plow lights will be on, you can add a switch to the loop.

The "Extend All Wings" button pushes the blade forward. The "Retract All Wings" button pulls the blade back. Up and down are as normal.

Aftermarket Control U-Set Instructions.

• Control plugs directly into your existing harness. NO adapter required. Just Plug-N-Plow.
• Please make sure the connector matches your connector before ordering.
• Automatic Shut-Off when not in use - approximately 22 minutes.
• The plow blade will coast to a soft stop (left or right) resulting in smoother operation and decreased wear on the plow's hydraulic system.
• Express Up/Down Feature.
• On/Off switch can be used as an Emergency Stop when required.
• Illuminated keypad on control for night time plowing.
• All control functions will time out (shut-off) after a period of time. This helps reduce wear on the pump motor and prevent unnecessary battery drain. Up button times out after 2.6 seconds, while left and right functions time out after 3 seconds.
• Flexible Straight Cord.
• Use for both Left or Right Hand.
• Dash Mount Control Holder Included.
• Instructions come with each control.
• Designed and Manufactured in the U.S.A.