44341 MVP Plus, MVP3 V Plow New Genuine Western 1-3/4 x 11 Dual Acting Angling Cylinder 1" Hole

A new Genuine Western Dual Acting Angling Cylinder for the MVP Plus & MVP3 V plows. This is considered a 1-3/4x11" cylinder used on all the newer V plows. They used Western part #44341. This uses the O ring style fittings and there is a port on the left and right of the pin hole on the back. One side is plugged and on the top in the front of the cylinder.  This is also used by Fisher, but they use part #44340.

This is a low friction cylinder. They do not use a compression packing, but an O ring sealed nut.

This has 1" holes for the pins. Center to center on the pin holes when closed is 18 1/4",

The tank is 17 from end to end including the nut.

The chrome rod is 1.5" across.

There are ports in the back on both sides that are flush and one towards the front that is raised both O-ring style.

If you need parts to repair your cylinder, the Seal Kit is #44342, Gland Nut #48985 and Decal #68675.