56718 Fisher SD / LD Series Plow Lift Cylinder Ram Assembly

A New Fisher Lift Cylinder # 56718.

This cylinder is used on the SD & LD Series plows. It was also included in the # 9825-1 kit.

This is considered a 1-1/2" x 6" cylinder. It has 1" pin holes in both ends. Center to center on the pin holes fully closed is 13.25" or end to end is 14.25. It has an oring pit that is line up with the pin hole. If you have an older plow you may have pipe thread instead. 

For related parts, check this document.