B60237 Factory New Blizzard Lift Cylinder 3-1/2x4 5/8 60237 8611LP 8611

A New Factory Blizzard Lift Cylinder. They had many different cylinders. We try and keep them all, so make sure this is the one you need. This one is the lift cylinder for 8611 or 8611LP Power Plow. It is a dual acting cylinder that mounts and dismounts the plow to the truck mount. This is considered a 3-1/2x4-5/8. The Blizzard part # is B60237 or 60237.  If they are pitted, they should be replaced as those pits take in water and cause freeze up in the pump. Get some Blizzard fluid while you are at it.

If you need a seal kit for this cylinder it is part # B60369.

If you are unsure, below is more info on this cylinder:

Dual acting.

Has a 3/4" bolt hole in either end.

The Chrome cylinder is 1-1/4" across.

End to end on the black housing is 10 9/16".

Measures 3-3/4" across the bottom of the black housing, but has a flat spot on each side where the pin goes which measures 3-3/8".