New Blizzard Lift Cylinder 3-1/2x4 5/8 B60237 8611LP 8611 SA4

Here is a new Aftermarket Blizzard Lift Cylinder (Blizzard part # is B60237 or 60237.) 

The aftermarket # is 1304644. They had many different cylinders and we try to keep them all in stock, so make sure this is the one you need.

This one is the lift cylinder for the 8611 or 8611LP Power Plow. It is a dual-acting cylinder that mounts and dismounts the plow to the truck mount. This is considered a 3-1/2x4-5/8. If they are pitted, they should be replaced since those pits take in water and will cause freeze-up in the pump. Get some Blizzard fluid while you are at it.

If you have a factory B60237 and need a seal kit, that is part # B60369.

If you are unsure, here is more information on this cylinder: it is dual-acting, has a 3/4" bolt hole in either end, the chrome cylinder is 1-1/4" across, end to end on the black housing is 10 9/16" and it measures 3-3/4" across the bottom of the black housing (but it has a flat spot on each side where the pin goes and that measures 3-3/8".)