41096 New Blizzard Power Angling Cylinder 1.75x11 Power Hitch 2 7600HD 9000HD 8600SW 86110LP

A New Genuine Blizzard Angling Cylinder.

This cylinder is used on the Power Hitch 2 plow only. It fits 7600HD, 8000HD, 8600HD, 9000HD, 8600SW, 8100PP and 86110LP. They had many different cylinders. We try to keep them all in stock, so please make sure this is the one you need. This is a heavy cylinder. Blizzard is known for the overkill cylinders they use. It is considered a 1-3/4x11 cylinder. The Blizzard is part #41096. If they are pitted, they should be replaced as those pits take in water and will cause freeze up in the pump.

If you need parts for this cylinder, the seal kit is #41097 and the gland nut is #50403.

Get some Blizzard fluid while you are at it.

If you are unsure if this is right for you, here is more info on this cylinder:

• It has a 1" pin hole in either end.
• The chrome cylinder is 1.75" across.
• The closed length from center of hole to center of hole is 17-1/4".
• The closed length from end to end is 18.75" long.
• End to end on the black housing is 16.5".
• This has an O-ring fitting and the port is in the side.