B60353 Blizzard Early 8611 Power Plow Pressure Pump 9 Spline 3.1CC 60353

A new Aftermarket Blizzard Plow Pump part #B60353.  This is a 9 spline shaft pump. They started using it in 1999 and stopped somewhere around 2005 (?). This is the same pump Blizzard uses. The early Blizzard plows used a splined shaft pump and the later one is a slotted shaft. There are two ways to tell which one you need. 1. take it apart and look 2. the splined shaft came with a gold motor and the slotted were a black motor Please note: If it was replaced with an aftermarket through the years it may not match. This pump was used on the #8611 Blizzard Plow. It has 3.1cc. This can be used to up the pressure on a smaller plow. It bolts right into the 760 through 810 plows with the splined shaft too.

Make sure you get a gallon of fluid so you can flush the system while you have it apart. Let us know what you need. We try and stock all these Blizzard parts.