B60353 Upgrade Blizzard Early 8611 Power Plow Pressure Pump 9 Spline 4.0CC 60353

A new Upgraded Blizzard Plow Pump B60353. The factory pump moved 3.1CC of fluid this pump we are selling is 4.0CC of fluid.

This is a Direct replacement. The early Blizzard plows used a splined shaft pump and the later one is a slotted shaft. There are two ways to tell. One, take it apart and look. Or two, the splined shaft came with a gold motor and the slotted were a black motor (BUT if they were replaced with an aftermarket through the years, it may not match that.) This pump was used on the 8611 Blizzard Plow. It has 3.1cc. This can be used to up the pressure on a smaller plow. It bolts right into the 760 through 810 plows with the splined shaft too.

Make sure you get a gallon of fluid so you can flush the system while you have it apart. Let us know what you need. We try and stock all these Blizzard parts.

This is a 9 spline shaft pump. They started using it in 1999 and stopped somewhere around 2005 (?).