Rebuilt 6 In. Fisher Cable Operated Plow Pump Conventional Mount

We buy pump cores of all brands and versions. Let us know what you have. We can take it for a trade.

Price requires a matching core. Different core may adjust price up or down.

You are looking at a freshly rebuilt Fisher Cable Operated Plow Pump. This is the short version used on the smaller plows. These were used on the Conventional mount snowplows. We tear these down, clean them up, inspect all parts, and they are put back together with all new seals and fluid. The pumps are tested on our test stand and then painted. We only use Fisher/Western oil. To properly install this and to get any form of warranty from us, you are required to change the fluid with Genuine Western/Fisher only in the hoses and cylinders before you hook this up. A common angling problem is bad couplers, so we recommend that you get a new set of couplers from us to match the pump you send us. 

The Fisher pump has 1" pin holes top and bottom. This is the short version for the HS plows called 6", but from center of pin hole to center it is around 13". The part # for this pump is A5796, or it came in kit A6125.

Here is a link to the instructions for this pump.

If you want to upgrade from the cable pump, you can convert to electric. It is not a cheap conversion, but it makes a nice setup. You need the solenoid pump, harness 56307, and the 56285 control.

If you have any problems, feel free to call us.