Aftermarket SnowDogg Controller Straight Blade Plow 16160600 Control Handheld MD HD EX TE

A New Handheld Control for the SnowDogg Straight Blade Plow.

*Take a look at the plug, there is a new style harness that has a different plug and you would need an adapter to use this style on the new version. Part # 16160372.

This has the correct plugs on it - no adapters. Plugs right in and replaces the factory 16160600 control. This is a much better design than the factory. Best of all, it has the soft stop built in. Watch the video above to see what it has to offer. This has a 12-pin plug. For the SnowDogg brand plows in series MD, HD, EX and TE.

Aftermarket Control User Instructions.

Straight Blade Aftermarket Control Instructions.

MD68, MD75, MD80, HD75, EX75, EX80, EX85, EX90, TE

• Control plugs directly into your existing harness, NO adapter required, just Plug-N-Plow
• Please make sure the connector matches your connector before ordering
• Automatic Shut-off when not in use, approximately 22 minutes
• The plow blade will coast to a soft stop (left or right), results in smoother operation and decreased wear on the plows hydraulic system
• Express Up/Down Feature
• On/Off switch can be used as an Emergency Stop when required
• Illuminated keypad on control for night time plowing
• All control functions will time out (shut-off) after a period of time. This helps reduce wear on the pump motor and prevent unnecessary battery drain, Up-button, times out after 2.6 seconds, while left and right functions time out after 3 seconds
• Flexible Straight Cord
• Use for both Left or Right Hand
• Dash Mount Control Holder Included
• Instructions come with each control
• Designed and Manufactured in the U.S.A.