Winter Equipment Cutting Edge Xtendor w/Curb Guard Carbide Matrix 8" Wide w/Bolts

Here is a Winter Equipment Xtendor Edge.

This bolts onto your blade with a new cutting edge. It has a built in curbguard and will multiply the life of your cutting edge, as well as help your edge to wear evenly. These come in a set of two and there are two sizes. This one is for cutting edges with 5/8" bolts, but we have the 1/2" version as well. These are 5-3/4" tall and 1-1/8" thick.

*Note: These can not be installed with a worn cutting edge. If your edge has a lot of wear, these will sit below that edge. Make sure your cutting edge measures close to 6" - if not, that will need to be replaced as well. 

For more information, check this link.

The Installation Instructions can be found here.

Will fit the plows listed below with 5/8" cutting edge bolts:

Western -

9' Heavyweight unimount- 58817

10' Heavyweight unimount - 58818

7'6" Pro Plus - 64775 

7'6" HTS 69505, 69499

7'6" Midweight 28594

8' Pro Plus - 66891, 63980, 

8'6" Pro Plus - 66998, 63985, 49086

9' Pro Plus - 66895,

Fisher - Minute Mount

L&M Series 9' Blade - 5534,

X Series 9' Blade -27590

8'6" V plows - 21587, 26460, 63540, 63284, 62649, 28409

10' Blade - 7082

Meyer -

C9' - 07259,

HM10' - 07235

Snowdogg -

MD68 - 16120510

MD/HD/TE/EX75 7'6" - 16120520

MD/HD/TE/EX80 8' - 16120620

VMD75 V plow 7'6" - 16120810

VX85 V plow 8'6" - 16120820

VX95 V plow 9'6" - 16120830

10' Blade HD - 16120662 

Blizzard -

7'6" 7600Hd 40695

7600LT 40597

8000HD 40697

8600HD

9000HD

SnowEx -

7600HD 84530 

8000HD  40696

8600HD 

9000HD